Directory

CWDM SFP+ 10Gbps Optical Transceiver Module

CWDM SFP+ 10Gps Transceiver Module.pdf File size: 385.41 KB Downloads: 161

 

The EOLP-1696-XX series optical transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of SFP+ MSA SFF-8431.
This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are four center wavelengths available from 1270nm to 1610nm, with each step 20nm. A guaranteed minimum optical link budget of 14 dB is offered.
The module is with the SFP+ connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the SFF-8472 specification.

Features:

• Supports 9.95Gb/s to 11.1Gb/s Bit Rates
• Hot-Pluggable SFP+ Footprint
• 4-Wavelengths CWDM DFB Transmitter, 1270nm, 1290nm...1610nm, with 20nm step.
• 14dB Power Budget at Least
• Duplex LC connector
• Case Operation Temperature Range 0°C  to  70°C
• Compliant with SFP+ MSA Specification SFF-8431
• Build-in Digital Diagnostic Functions
• Digital Diagnostic Monitor Interface Compliant with SFF-8472 MSA Specification
  

Applications

• 10GBASE-ER/EW 10G Ethernet
• 1200-SM-LL-L 10G Fiber Channel
• ITU-T G.709
  

 
Regulatory Compliance

Feature	Standard	Performance
Electrostatic Discharge (ESD) to the Electrical Pins	MIL-STD-883G /Method 3015.7	Class 1C (>1000 V)
Electrostatic Discharge to the Enclosure	EN 55024:1998+A1+A2 IEC-61000-4-2 / GR-1089-CORE	Compliant with standards
Electromagnetic Interference (EMI)	FCC Part 15 Class B / EN55022: 2006  / CISPR 22B: 2006 /VCCI Class B	Compliant with standards
		Noise frequency range: 30MHz to 6GHz. Good system EMI design practice required to achieve Class B margins.
		System margins are dependent on customer host board and chassis design.
Immunity	EN 55024:1998+A1+A2 / IEC 61000-4-3	Compliant with standards. 1KHz sine-wave, 80% AM, from 80MHz to 1GHz. No effect on transmitter/receiver performance is detectable between these limits.
Laser Eye Safety	FDA 21CFR 1040.10 and 1040.11 /EN (IEC) 60825-1: 2007 /EN (IEC) 60825-2: 2004+A1	CDRH compliant and Class I laser product.
		TüV Certificate No. 50135086
Component Recognition	UL and CUL / EN60950-1: 2006	UL file E317337
		TüV Certificate No. 50135086
		(CB scheme )
RoHS6	2002/95/EC 4.1&4.2 / 2005/747/EC 5&7&13	Compliant with standards*note3

 

SFP+ MSA.pdf File size: 1.22 MB Downloads: 198