Directory

CWDM XFP 70km 10Gbps Optical Transceiver Module

CWDM XFP 70km 10Gbps.pdf File size: 339.91 KB Downloads: 233

 

The EOLX-1696-70-X CWDM XFP 70km series optical transceiver is designed for fiber communications application such as 10G Ethernet (10GBASE-ER/EW) and 10G Fiber Channel (1200-SM-LL-L), which fully compliant with the specification of XFP MSA Rev 4.5.
This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are eight center wavelengths available from 1470nm to 1610nm, with each step 20nm. The maximum distance in lab is 70km.
The module is with the XFP 30-pin connector to allow hot plug capability. Only single 3.3V power supply is needed. The optical output can be disabled by LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the loss of an input optical signal of receiver.
This module provides digital diagnostic functions via a 2-wire serial interface as defined by the XFP MSA Rev 4.5.

Features

• Supports 9.95Gb/s to 11.1Gb/s Bit Rates
• Hot-Pluggable XFP Footprint
• Compliant with XFP MSA
• 8-Wavelengths CWDM EML Transmitter from 1470nm to 1610nm, with Step 20nm
• Very Low TEC Power Consumption
• Maximum distance in Lab is 70km
• Duplex LC Connector
• Power Dissipation < 2.5W
• Case Operation Temperature Range-5°C to 70°C
• 2-Wire Interface for Integrated Digital Diagnostic Monitoring

Applications

• 10GBASE-ER/EW 10G Ethernet
• 1200-SM-LL-L 10G Fiber Channel
• CWDM networks
• Other Optical Links

As defined by the XFP MSA, Eoptolink XFP transceivers provide digital diagnostic functions via a 2-wire serial interface, which allows real-time access to the following operating parameters:

• Transceiver temperature
• Laser bias current
• Transmitted optical power
• Received optical power
• Transceiver supply voltage

It also provides a sophisticated system of alarm and warning flags, which may be used to alert end-users when particular operating parameters are outside of a factory-set normal range.

Band	Nomenclature	Wavelength(nm)
		Min.	Typ.	Max.
S-band Short Wavelength	K	1464	1470	1477.5
	L	1484	1490	1497.5
	M	1504	1510	1517.5
	N	1524	1530	1537.5
C-band Conventional	O	1544	1550	1557.5
L-band	P	1564	1570	1577.5
Long Wavelength	Q	1584	1590	1597.5
	R	1604	1610	1617.5
CWDM*: 16 Wavelengths from 1470nm to 1610nm, each step 20

XFP MSA.pdf File size: 2.64 MB Downloads: 329

  

compatible XFP ALCATEL, ALLIED, ASANTE, AVAYA, BLACKBOX, BROCADE,CISCO, DELL, DLINK, EMULEX, ENTERASYS, EXTREME, FORCE10, FOUNDRY, HEWLETT PACKARD, HUAWEI, H3C, INTEL, JUNIPER, LINKSYS, MARCONI, MiLAN, NETGEAR, NORTEL, PACKETFRONT, PLANET, RIVERSTONE, SMC, TELCO, TRENDNET, VIXEL, ZYXEL