Transceivers that change the way you compete

XFP

Tunable DWDM XFP Tunable DWDM XFP

DWDM tunable XFP 10 Gbps multiprotocol optical transceiver with 50 GHz ITU channel spacing with integrated wavelength locker.

DWDM XFP DWDM XFP

Eoptolink DWDM XFP transceivers are available in channels defined in the ITU Grid (100 GHz spacing), from Channel 19 to Channel 61, or ITU Grid (50Ghz spacing), from channel 200 to 592ch, 40km and 80km reach

CWDM XFP CWDM XFP

CWDM XFP optical transceivers are designed for Storage, IP network and LAN. The CWDM XFP is available in 18 waves, from 1270 to 1610 with 20nm step.

BIDI XFP BIDI XFP

Eoptolink BID XFP transceivers are designed for bi-directional 10G serial optical data communications over singe fiber, also called WDM XFP, Bi-directional XFP, single fiber XFP

XFP Transceiver XFP Transceiver

XFP are designed for SM or MM fiber and operates at a nominal wavelength of 850/1310/1550 nm, XFP SR, SFP LR, XFP ER and XFP ZR. Used both for 10G-BASE ETH and SDH/SONET.

XFP Twinax Cable XFP Twinax Cable

EOLX-96-CLB-XX Copper XFP Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications

8G XFP 8G XFP

Eoptolink offers complete range of Fiber Channel 8.5G XFP, including CWDM 8G XFP, DWDM 8G XFP, XFP FC

XFP Test Board XFP Test Board

Eoptolink XFP Host Test Boards are designed to provide an efficient and easy method of programming and testing XFP Electrical Loopbacks and Transceivers.

MultiRate XFP MultiRate XFP

Eoptolink series multi-rate 8G/10G XFP transceiver is designed for serial optical data communications such as 8G Fiber Channel and 10G/11.1G speed rates.

XFP loopback XFP loopback

XFP Electrical Loopbacks from Eoptolink provides a method for port operation testing in board, hub, system and applications.

XFP modules are hot-swappable and protocol-independent. They typically operate at near-infrared wavelengths (colors) of 850 nm, 1310 nm or 1550 nm. Principal applications include 10 Gigabit Ethernet, 10 Gbit/s Fibre Channel, synchronous optical networking (SONET) at OC-192 rates, synchronous optical networking STM-64, 10 Gbit/s Optical Transport Network (OTN) OTU-2, and parallel optics links. They can operate over a single wavelength or use dense wavelength-division multiplexing techniques. They include digital diagnostics that provide management that were added to the SFF-8472 standard. XFP modules use an LC fiber connector type to achieve high density. The XFP specification was developed by the XFP Multi Source Agreement Group. ftp://ftp.seagate.com/sff/INF-8077.PDF

Contacts

HQ and factory: Eoptolink Technology Inc. Ltd, F5&F4,Building 2&1, No.21,Gaopeng Avenue, High-tech District, Chengdu 610041, China.
Tel: 86-28-85122709
Fax: +86-28-85121912
Email: sfp@eoptolink.com
Skype: eoptolink-sfp